GD-A Full-automatic dot-by-dot high-speed rewinding and perforated kitchen towel machine
Full-automatic high-speed glue lamination kitchen towel rewinding machine perforation machine. This equipment is to perforate and cut the raw paper into various sizes according to the requested. The finished product is neat, in good order and with equality tension. It has the feature of compact structure, easy and stable operation, less electricity consumption and covers a small area of 8.4 m². The highest production speed is 120-180m/min. This model is the ideal equipment for paper making factory and paper processing factory.
This equipment can process raw paper of 1.2m 1.75m 2.0m 2.2m 2.4m 2.6m 2.8m in width.
This machine is consist of stand of raw material, paper conveying unit, embossing unit, spraying unit, perforating unit, reeling unit, electricity control and cutting system.
The production process is : unreeling —→ embossing —→gluing—→perforating—→reeling—→cutting.
1. Programmable controller(computer) control production processes, production process automation coefficient, equipment fully furnished, high production efficiency.
2. Change core automatically with stop machine, rewinding, spray glue, sealing, when change core , up speed and down speed automatically.
3. When change core rewinding, tight first and then loosen, avoid product core pipe get loose.
4. Tension of final product can be adjusted.
5. Auto point to add core pipe, machine stop automatically when there is no core pipe.
6. When raw material broken down, machine will stop automatically.
7. Each jumbo roll unreeling separately, match with tension control.
8. Easy to adjust to produce different core pipe for rewinding.
9. There is paper tail of sealing, for easy use
10. Push jumbo roll on stand by pneumatic.
11. Adopt double embossing roller to produce “ dot-by-dot” product.
12. According to requirement, machine can equip with single embossing device or double embossing device, with vivid designs.
13. In case customer require, the machine can add coreless device.
Main Technical data:
|Width of raw material||1200||1750||2000||2200||2400||2600||2800|
|Dia.of finished product||60-130mm(the tension is adjustable)|
|Dia.of core of finished product||20-50|
|Dia.of raw material||1200mm(can accept customers requirement)|
|Dia of core of raw material||76.2mm|
|Perforation distance||4 knives100-120mm，2 knives 200-240mm （other specification, please point out）|
|Parameter setting||Touch screen man-computer interface operation system|
|Programmable controller||PLC computer program|
|Raw material holder||2 layers(3layer, please order)|
|Glue lamination system||3 roller colored glue lamination device, can produce both colored glue and ordinary glue product|
|Embossing device||Double face embossing, steel to rubber embossing|
|Pneumatic system||Pressure 5kg/cm2pa( prepared by customers)|
|Overall Dimension (LXWXH)||7100X2850X1800-7100X4250X1800mm|
Compare in function:
|Old Type||New Type|
|structure||Use ordinary embossing device , the diameter of embossing roller and glue roller is small.Embosisng device and glue lamination is separated , the cost is low||Use the new overall wall structure, the wall plate thickness is above 40mm,diameter of embossing roller and glue roller is bigger, embossing and glue is formed in one time, the cost is high|
|Way of glue lamination||After embossing the complete paper was with glue , it will laminated together after run a distance||When embossing , glue will be transfered to the point of embossment ,paper will be laminated together before the glue dry.|
|effect||Glue is uneven , glue consumed too much , product no eady to dry, effect of embossing is not good, speed slow.||There is only has glue on point of embossing , glue consumed a little , the glue the very even. The forming of embossing is good , speed fast.|
|Stability of equipment operation||Paper should pass glue roller completed, it will require good quality paper and workers technically demanding, easy to have fault.||Only point has glue, running steady , can use wide range for paper . Low fault and steady.|
|Effect of finished product||The effect of lamination is not good. Glue can’t stick.||The effect of lamination is good.|